Top 10 usual forklift crashes ， forklift procedure need to pay attention to these issues ！.

Don't take too lightly the forklift at the workplace. If the operation is not good, there will be major accidents in mins, and there are lots of accidents including forklifts.

Case 1: The forklift freight obstructed the chauffeur's view, and the person in front could not be located, causing a rolling accident.
Instance 2: In order to preserve the balance of the forklift when lifting heavy goods, the employees used their body weight as the counterweight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo exceeds the permitted width of the course and hangs on the roadside shelf, which almost creates an crash.
Situation 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not discover the pedestrian, and the pedestrian did not observe the forklift.
Case 6: The forklift raises the personnel illegally, the forklift vehicle driver does not put on the safety belt, the forklift lifter falls and the driver is crushed when the forklift rolls over.
Situation 7: The forklift chauffeur did not wear a safety belt and fell from the vehicle when it surrendered and was squashed.
Forklift operation should pay attention to these matters ：.

Beginning.
1. Before beginning, observe the surroundings, and after validating that there are no challenges that hinder the safety and security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale need to be secure before starting.
3. When the forklift starts with a tons, the driver must initially validate that the load is steady and trusted.
4. The start needs to be slow-moving and steady.

Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the pole must be slanted backward. .
2. Do not lift the fork expensive when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles overhead. When the load is taking a trip, the fork needs to not be elevated expensive, which will influence the stability of the forklift. .
3. After dumping, the fork ought to be reduced to the typical driving setting before driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal must be issued first. High-speed sharp turns are prohibited. High-speed sharp turns will certainly cause the vehicle to lose side security and tip over. .
5. When the forklift is downhill, it is strictly prohibited to turn off the flame and slide, and it is forbidden to brake unexpectedly while driving with tons unless there are special situations.
6. When the forklift is running, it must follow the traffic rules in the manufacturing facility and must maintain a certain safety distance from the lorry ahead. .
7. When the forklift is running, the lots has to be in the most affordable setting that does not impede the driving, and the gantry needs to be effectively slanted back. The load shall not be elevated other than when piling or filling. .
8. The elevation of the lots need to not obstruct the driver's sight. In special situations, when the product impacts the forward vision, drive at a reduced speed when turning around.
9. It is forbidden to activate the ramp, nor to drive across the ramp. .
10. The secure driving speed of the forklift in the factory location is 5 km/h, and it must drive securely at a reduced speed when going into the manufacturing workshop area. .
11. When the forklift is lifted, lifted or driven, it is restricted for personnel to base on the fork to hold things and play a balancing role. .
12. If issues are located, they will be repaired and reported in a timely way, and they will certainly never operate with ailments or conceal them.

loading and dumping.
1. When fork-loading items, the distance between both forks need to be adjusted as needed to make the tons of the two forks well balanced and not manipulated, and one side of the thing ought to be against the rack. .
2. It is prohibited to collaborate with a solitary fork or make use of a fork top or pull. In special situations, security indication need to be established to remind surrounding pedestrians. .
3. In the process of packing and discharging products, the forklift needs to be stopped with the brake. .
4. The rate of the lorry should be slow and stable. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and harm Electric Forklift Truck for Warehouse people. .
5. When making use of a fork to fork the goods, the fork needs to be as deep as feasible under the lots, and it needs to be noted that the fork suggestion should not touch various other items or things. The tons must be supported with minimal back tilt of the gantry to make sure that the load does not glide in reverse. The mast can be slanted onward somewhat when the tons is lowered to allow for easy positioning of the tons and extraction of the forks. .
6. It is forbidden to fork items at broadband and hit hard things with the fork head. .
7. When the forklift is working, it is forbidden for individuals to stand around the fork, so regarding prevent the collapse of the goods and harm people. .
8. Straining is banned, and it is forbidden to use forks to raise workers to participate in high-altitude operations to prevent high-altitude falling crashes. .
9. It is not enabled to use the brake inertia to slip, place, round or roll things. .
10. It is not enabled to use forks to choose, Stand-on Electric Pallet Stacker turn pallet discharge.

Leaving .
1. It is forbidden to leave the forklift when the things on the fork impend. Before leaving the forklift, you have to discharge the goods or reduced the fork frame.
2. Draw the parking brake take care of to dead or depress the hand brake switch.
3. The engine is shut off and the power is removed. (Except for special scenarios, such as the chauffeur does not leave the lorry's line of sight and does not surpass 1 min).
4. Remove the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance needs to be checked, and fuel, lubing oil and air conditioning water ought to be added.
2. Examine the safety performance of starting, running and stopping.
3. Inspect whether the lights and horn signals are full and effective.
4. During the operation of the forklift, inspect whether the stress and temperature are normal.
5. After the forklift is running, the outside leak needs to additionally be checked and the seals ought to be replaced in time.

Forklift Safety Operation Specifications.
1. You need to examine prior to leaving the vehicle;.
2. When you run into a person before you throughout driving, you need to send out a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the freight must be 0.3 m ~ 0.4 m in the air;.
5. The transforming must not be as well sharp to avoid the tendency of " complimentary turning";.
6. Running up and down the slope should be slow and uniform, and no turning on the incline is permitted.
7. Do not drive throughout the gradient. When the gradient is greater than 10%, the vehicle should be driven in reverse when declining;.
8. When the forklift workers bring the goods and move forward, if they encounter huge or hefty products and go to the driver's view, they must take the reversing exercise
.
The "Eight Prohibitions" must be complied with in the operation.
1. Single fork procedure is not enabled.
2. It is not permitted to lift the goods for long distance driving.
3. It is not permitted to grab the goods by handing over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not allowed to utilize inertia pressure to get the goods.
6. It is not allowed to utilize stopping force to expatriation round or easy-to-roll things.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive laterally on slopes
.
Car park is not allowed under the list below problems.
1. Curves, narrow roadways, train crossings;.
2. Areas with a longitudinal slope above 5%.
3. When there is an barrier on one side of the road, the contrary side of the section with the same length as the challenge need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844